Table of Contents
Advertisement
5
Controls and Connections
5.2
Back Panel Layout
Input Select Buttons
TRS1: Patches the analog TRS1 input to the Mains.
TRS2: Patches the analog TRS2 input to the Mains.
Digital: Patches the current digital input selection to the Mains.
Aux: Patches the analog Aux input to the Mains.
输入选择按钮
TRS1：将模拟TRS1输入接入主电源。
TRS2：将模拟TRS2输入接入主电源。
数字：将当前的数字输入选择接入主电源。
Aux：将模拟Aux输入接入主电源。
Digital Input Select:
Selects the S/PDIF or Toslink input as the digital source for the Cue and Main audio paths.
数字输入选择。
选择S/PDIF或Toslink输入作为提示和主音频路径的数字源。
Passive Speaker Controls
Speaker Select A,B,C:
Activates the stereo speaker line outputs.
Mute: Mutes the Main Audio Output.
Dim: Attenuates the Main audio output by -16 dB.
Mono: Sums the left and right signals.
无源音箱控制
扬声器选择A、B、C：
激活立体声扬声器的线路输出。
静音：将主音频输出静音。
调光：将主音频输出减弱为-16dB。
单声道：将左边和右边的信号相加。
Talk Button:
Engages / disengages the talkback microphones on both the CSR-1 and the Central Station.
Because both microphones remain active when the CSR-1 is connected, it is recommended
that you turn the Talkback Mic level all the way down on the main unit when you are not using it.
通话按钮：
启用/禁用CSR-1和Central Station 的对讲机麦克风。
因为当CSR-1连接时，两个麦克风都处于活动状态，建议你在不使用时，将主机上的对讲机音量全部调低。
Main Level: Adjusts the overall volume level of the Main output.
Active Light: When illuminated, this light alerts you that your CSR-1 has Main Volume Control.
主水平：调整主输出的整体音量水平。
活动指示灯：当亮起时，此灯提示你CSR-1有主音量控制。
Talkback Mic and Level: The Talkback Mic Level adjusts the gain for the built-in eletret condenser microphone
on the CSR-1 only.
Because the Talkback Mic in the CSR-1 remains active when an external microphone is connected, we recom-
mend you turn the Mic Level all the way down when using an external talkback m
28
Central Station Plus
Advertisement
Table of Contents
