ABI Attachments Workman XL Owner's Manual page 25

Wireless System Installation
Open the Black Box located on the trailer just above the
electric lift - refer to Fig 12 on page 9 for black box location
(Fig 71). NOTE: Black box does NOT need to be removed
from trailer to install the wireless system - black box in views
is only removed for installation demonstration.
Locate the preinstalled 4 pole connector inside the
Black Box, which has yellow, green, black, and white wires
connected to it (Fig 72).
Connect the Wireless Receiver plug to the 4 pole connector
in the Black Box. Plug will only fit one way. Push the
connectors together until it clicks (Fig 73).
Carefully place the new Wireless Receiver on top of the brake
controller in the Black Box. Close Black Box (Fig 74).
Press the buttons on the key fob to raise and lower the
trailer bed.
Email: support@abiattachments.com
Fig 71.
Fig 73.
Plug the connectors
together until it clicks.
Brake Controller.
25
Preinstalled 4 pole connector
inside the Black Box.
Fig 72.
Gently place the new
Wireless Receiver on top
of the brake controller.
Fig 74.
Call Toll Free: 877-788-7253