ABI Attachments Workman XL Owner's Manual page 13

Fig 20A.
Fig 21.
Secure the trailer wiring connections
with black electrical tape to prevent
the wires from becoming unplugged.
Email: support@abiattachments.com
Spacers on inside of
brackets on either
side of actuator lift.
Fig 20B.
Washers next to bolt
head and locknut.
Hardware from
Packet "G".
Hardware from
Packet "F".
Swing arms on
Brake axle.
Fig 22.
Set brake axle on frame with swing
arms on axle facing toward tail light.
Fig 23.
Align axle brackets so they are
parallel to rectangular frame before
tightening bolts.
Fig 24.
Swing arms on
Idler axle.
Fig 25.
Set idler axle on frame with swing
arms on axle facing toward tail light.
13
Tail light.
On both sides, connect
the brake wires to the
wires coming out of the
side of the frame.
Tail light.
Call Toll Free: 877-788-7253