Table of Contents
Advertisement
Kaba Mas
DKX-10 Contents or Parts
Lock Parts for Installation
1. Mounting Plates
2. Modified CDX-10 Extension Plate with
an X-10 Combination Lock
3. Spindle
4. Dial Assembly
5. Installation Instructions
6. Installation Kit
7. Back Plate
8. Hub
9. Screw Kit
Strike Kit
10.
Escutcheon Plate
11.
DKX-10 Installation Kit Contents
(P/N 504002)
1. Blade, saw (52 teeth/inch)
2. Handle, saw
3. Tube, outer
4. Tube, inner
5. DKX-10 to door mounting screws, pan head #10 x 1.25,
Type AB (6)
6. Dial ring attaching locknuts, #8-32 (2). (Packaged with
and used with exterior mounting plate)
7. Rubber vise clamp
8. Lubricant
9. Gauge, dial hub locating
10. Zebra Connector and Retainer
11. Cable Tie Clips (3)
12. Dial ring to door mounting screws, pan head #8 -32 X
1.0 Type AB (2).
13. Cover Lock Pin and Clip
14. Stone, deburring
15. Hex key (5/₆₄")
DKX-19 Contents or Parts
Lock Parts for Installation
1. Mounting Plates
2. Modified CDX-10 Extension Plate
with a S&G 2740b Combination Lock
3. Dial/Spindle Assembly
4. Install Kit
5. Misc. Install Kits (3X)
6. Strike Kit
7. Lubrication
8. Escutcheon Plate
9. Back Plate
8
Installation Guide / DKX-10 Type II
DKX-19 Installation Kit Contents
(P/N 514044)
1. Blade, Saw (52 teeth/inch)
2. Handle, Saw
3. Rubber Vise Clamp
4. Stone, Deburring
Document Number 548.0418 Rev. AX — 02/2019
Advertisement
Table of Contents
