Table of Contents
Advertisement
The Kaba Mas X-10 used with the DKX-10 type II is protected from Electrostatic Discharge (ESD)
WARNING:
damage once installed, but can be damaged during the installation process if proper precautions are not
observed. Follow these precautions to avoid ESD damage when installing the lock:
• Do not touch the end of the flex cable if the ESD protective cover has been removed.
• For the best protection, use an ESD wrist band grounded to the lock during installation.
• The lock is protected to greater than 25,000 V when correctly installed.
The GSA approved Kaba Mas FF-L-2890B type II Lever Release Lockset is available for use with a Kaba
NOTE:
Mas, Style 1, X-10 combination lock or a Sargent & Greenleaf (S&G) 2740B, Style 2 combination lock.
This document designates the Best 9K Cylindrical Lockset with a modified CDX-10 lock as: DKX-10 Type II.
This document also designates the Best 9K Cylindrical Lockset with a modified CDX base with the S&G
2740B lock as: DKX-19, Type II.
The DKX-10, Type II combines, through linkage, a Best 9K cylindrical lockset and a Kaba Mas CDX-10 base-
plate. If the system is ordered with a Kaba Mas X-10, the X-10 is mounted to the baseplate. If the system
is ordered with an S&G combination lock, the S&G lock is mounted to the CDX-10 baseplate. The
procedure to mount the DKX unit to the door is the same whether the combination lock is an X-10 or an
S&G 2740B lock. The process to install and set up the X-10 (once the CD base plate is mounted to the
door) is the same as it would be for any X-10 or CDX-10 installation. The installation and setup for the
S&G 2740B lock is also the same as it would be for any standard installation. A copy of the Kaba Mas X-10
installation instructions is provided when the device is ordered with an X-10. S&G's 2740B lock installation
instructions are provided with the S&G lock when it is specified.
Only technicians who have successfully completed manufacturer certified training for FF-L 2740B
combination locks should install the DKX-10 or the DKX-19.
NOTE: One set of instructions should be left with the building owner after devices have been installed.
Trademarks
The following items are trademarks or registered trademarks of Kaba Mas in the United States and/or other countries.
• PowerStar Technology
• DKX-10, X-10
Document Number 548.0418
Rev. A 09/18
Kaba Mas LLC
1051 Newtown Pike Ste. 150
Lexington, KY 40511 USA
Phone: 859-479-1329 FAX: 859-303-8993
Technical Support: 800-950-4744
Advertisement
Table of Contents
