Synchronizing To An External Sequencer; Midi Transpose; Midi Filter - Korg SP-500 Owner's Manual

To return to the previous display
If you press the [EXIT] switch or the
[FUNCTION] switch, the [FUNCTION]
switch indicator will go dark, and you
will return to the previous LCD screen.
When the power is turned on, this setting will
automatically be Local On.
Synchronizing to an external
sequencer
An external sequencer or drum machine connected
via MIDI can be synchronized to the SP-500's
recorder for synchronized playback.
1
Press the [FUNCTION] switch
2
Access the "Func 4/10" page
3
Select a "Sync." radio button
Press either the "Int." or the "Ext." radio
button.
"Int.": The internal clock will be used.
Select "Int." when you are using the SP-
500 by itself, or when using it as the mas-
ter (controlling device) to synchronize
external MIDI devices to the MIDI clock
transmitted by the SP-500.
"Ext.": The SP-500's recorder will operate
in synchronization with the MIDI clock
messages it receives. Select "Ext." when
you are using the SP-500 as a slave device
(the device being controlled) that is syn-
chronized to the MIDI clock transmitted
from an external device.
To return to the previous display
If you press the [EXIT] switch or the
[FUNCTION] switch, the [FUNCTION]
switch indicator will go dark, and you
will return to the previous LCD screen.

MIDI Transpose

You can specify whether the "Transpose" setting of
the "Func 1/10" page will be applied to the data
that is transmitted or received via MIDI.
1
Press the [FUNCTION] switch
2
Access the "Func 4/10" page
3
Select one of the "MIDI Trans-
pose" radio buttons
Press either the "Tx" or "Rx" radio but-
ton.
"Tx": Transpose will apply to the trans-
mitted note data that you input from the
keyboard. It will not affect the received
note data.
"Rx": Transpose will apply to the
received note data.
It will not affect the transmitted note
data.

MIDI Filter

You can specify whether or not each type of MIDI
message (e.g., program change, control change)
will be transmitted and received.
1
Press the [FUNCTION] switch
2
Access the "Func 5/10" page
3
For the types of MIDI message
that you do not wish to transmit
or receive, select the correspond-
ing check box to turn it off
"Prog.": Program change
Programs of a connected MIDI device can
be changed by transmitting program
changes from the SP-500.
71