Rear Panel - Korg SP-500 Owner's Manual

Rear panel

8 7
1. AC 9V connector
Connect the included AC/AC power supply
here. ( p.14)
2. [POWER] switch
This switch turns the power on or off. Each
time you press it, the power will be switched on
or off. ( p.14)
3. ASSIGNABLE SWITCH jack
The included pedal or a separately sold DS-1H
damper pedal can be connected here. ( p.13,
33, 66)
4. DAMPER (pedal) jack
The included pedal or a separately sold DS-1H
damper pedal can be connected here. ( p.13,
33, 66)
5. OUTPUT jacks
These jacks can be connected to the input jacks
of an audio devise to output the sound, or to a
tape recorder to record your performance. Use
the [MASTER VOLUME] slider of the SP-500 to
adjust the volume.
When making connections in stereo, use the L/
MONO jack and the R jack. When making con-
nections in mono, use only the L/MONO jack.
Use cables with 1/4 inch monaural phone
plugs.
6. INPUT jack
The output jack of a CD player or other audio
device can be connected to this jack, so that its
sound can be heard through the SP-500's head-
phones. Use the controls of the connected audio
device to adjust the volume.
Use a stereo mini-plug (1/8 inch) cable.
7. [MIDI] connectors
These connectors can be connected to other
MIDI devices such as a synthesizer, sequencer,
or rhythm machine, so that data can be
exchanged with these devices.
p.69 "1. Connecting MIDI equipment"
6 5 4 3
8. Contrast
9. Holes for attaching the music stand ( p.14)
2 1
This adjusts the contrast of the screen. ( p.15)
Attach the included music stand using these
two holes.
9
11