Custom Style Parameter List - Korg SP-500 Owner's Manual

5
Edit the rhythm style
You can modify the settings in "Custom
Style" pages 1/2 and 2/2.
For details on the settings that can be
modified, refer to "Custom style parame-
ter list".
6
Name your custom style
In the "Custom Style 2/2" page, press the
"Rename" button to access the "Reneme"
page. Assign a name to the rhythm style
that you edited. ( p.48)
7
Save your custom style to inter-
nal memory
In the "Custom Style 1/2" page, press the
"Write" button.
To revert to the original style
If you press the "Cancel" button instead
of pressing the "Write" button, you will
return to the main page, and the rhythm
style you created will revert to the data
you selected in step 2.
Never turn off the power while the "Write"
operation is in progress.

Custom style parameter list

"Custom Style 1/2" page
"Tempo" cell: Specify the tempo of the
rhythm style. This is adjustable in a range of
40–240.
"Damper Enable" check box: For each key-
board part, you can specify whether or not
the damper pedal will apply to the sounds
played from the keyboard.
Upp1: Sound of the Upper1 if [LAYER] switch
or [SPLIT] switch are on, or sound of the key-
board if [LAYER] switch and [SPLIT] switch
are off
Low/Upp2: The left-hand sound for [SPLIT],
or the sound layered on "Upp1" for [LAYER].
"Custom Style 2/2" page
You can make the settings listed below for
each accompaniment part: Drum, Perc, Bass,
Acc1, Acc2, Acc3, Upp1, Upp2, and Low.
"Part" cell: To change the part, use the cells
" ", " " or the dial, [VALUE] switches.
For the Upp1, Upp2, and Low parts, it is not
possible to set the "Prog." cell, "Reverb" cell,
and "Chorus" cell.
"Wrap Around" cell: This can be specified
for the Bass, Acc1, Acc2, and Acc3 parts. This
allows the pitch to be shifted upward (or
downward) by one octave if the accompani-
ment of that part becomes unnaturally low
(or high). The range of settings is "Org, 1–
12." With a setting of "Org," the style will
use its original setting.
For example based on a C chord, a Wrap-
Around setting of "1" would cause the
accompaniment to be shifted downward one
octave when a C# chord was specified. With
a setting of "2," the accompaniment would
be shifted downward one octave when a "D"
chord was specified.
With setting "1"
C chord fi Bass pattern 1
C# chord fi 1 by a semitone and lower by
an octave 2
D chord fi 1 by a semitone and lower by an
octave 3
47