Konica Minolta MS6000 MKII User Manual page 98

System Settings
The print func- After a toner empty condition is detected,
tion at the time of this function allows you to select either to
Toner Empty stop printing or continue printing
detection
(PR mode only)
Auto Film For- The Auto Format Select Print Function is
mat Select print enable or disable through the control
function panel.
(PR mode only)
90 degree rota- Enables the prism to rotate the screen
tion setting image 90 degrees.
Automatic paper Allows you to specify the paper source
source switching when Letter or A4 size paper is loaded in
(PR mode only) Lengthwise or Crosswise orientations
into the both paper feeding tray and paper
feeding cassette.
Auto switching: Printing continues by
automatically switching to the remaining
paper source after paper in the specified
paper source runs out.
Disabling Auto Switching: A paper
empty mode occurs and printing ceases
after paper in the specified paper source
runs out. The paper source must be
refilled or the paper source must be
switched by pressing the Output Selec-
tion Key in order to resume printing.
* To change any of the system settings described above, contact the authorized dealer.
Description
2. Initial Settings
Selection Initial Setting
Disable
*
Print
Enable
Print
Enable * (200V)
Disable * (120V)
Enable
Disable *
Auto
*
switching
Disabling
Auto
Switching
4-13