Entering And Leaving The User Mode - Konica Minolta MS6000 MKII User Manual

4-6
2. Initial Settings

Entering and Leaving the User Mode

Hold down the Shift key and Output Selection key at the same time for 0.5 sec.
1
The Multi-Print Display displays a "U."
Press the Exposure Adjustment key (Darker or Lighter) to select the specific function.
2
Pressing the Darker key selects the function in the following order: U → U1
D arker
→ U2 → U3 .. → U8.
Pressing the Lighter key selects the function in the following order: U8 → U7
L ighter
→ U6 → U5 .. → U.
Press the Exposure Mode key to display d(*).
3
*: Current setting value
Press the Exposure Adjustment key (Darker or Lighter) to select the specific setting
4
value.
Pressing the Darker key selects the setting value in the following order: d0 →
D arker
d1 ..
Pressing the Lighter key selects the setting value in the following order: d5 →
L ighter
d4 ....d0
Press the Start key to validate the setting value.
5
S tart
If the Exposure Mode key is pressed, the setting value is not validated and the User
mode initial screen (U) appears.
If a new function is to be set, start the procedure over beginning with step 2.
Press the Clear key.
6
This lets you leave the User mode, returning back to the ordinary mode.
O utput
S election
U ser M ode
S hift
A uto
Z oom clr