NEW BRUNSWICK SCIENTIFIC innOva 4200 Manual To Operation page 51

There are two fuses for the Innova 4200. They are located behind the front panel. To
replace a fuse:
1. Set the
ON/OFF POWER
2. Disconnect the
3. Before you can gain access to the front panel, open the door of the shaker. The door
must be open all the way.
4. Use a Phillips (+) head screwdriver to unscrew the three screws that attach the hinged
front panel to the housing. Gently lay down the front panel.
5. Gently twist the black cap until the fuse pops out.
6. Removethe bad fuse and replace it with a new fuse.
7. Replace the black cap and twist until tight.
8. Lift up hinged front panel and replace the three screws. Use a Phillips (+) head
screwdriver and tighten the screws.
9. Close the door of the shaker.
10. Reconnect the
Innova 4200 • M1233-0053
Switch to
OFF
from the electrical outlet.
POWER CORD
Figure 19: Fuse Replacement
F1
0.16A 1.6A
to the electrical outlet.
POWER CORD
.
F2 F3
10A
51
User's Guide