Table of Contents
Advertisement
To make the proper electrical connection, follow these steps:
1. Verify that the
correct voltage and frequency for your shaker model (see Sections 6.1 & 6.2 above).
2. Plug the
IEC-320
IEC-320 POWER CONNECTOR
3. Plug the pronged end of the
wall outlet.
4. Verify that the necessary platforms are properly installed and secured (see Sections
6.3 & 6.4 above).
Innova 4200 • M1233-0053
VOLTAGE SELECTOR
socket end of the
POWER CORD
on the back panel of the Innova 4200 (See Figure 4).
IEC-320 POWER CORD
and the
FREQUENCY SWITCH
securely into the
into a grounded power strip or
23
are set to the
User's Guide
Advertisement
Table of Contents
