Table of Contents
Advertisement
7.12.1
Electrical Moisure-Proof Plug
The AC socket (see Figure 12 below), with cover and mating plug (supplied) is designed
to be used in humid environments. To use the socket, you have to connect the special
male plug (supplied K0380–0871 with the unit) to the equipment that you use in the
Innova 4200. If your equipment has a detachable power cord, you may want to obtain a
different power cord to be used solely with the Innova 4200 shaker.
STRAIN RELIEF
TERMINAL
BLOCK
METAL BRACKET
WARNING!
The internal AC circuit supplied is fused at 200 Watts. DO NOT connect
other equipment that requires more power.
WARNING!
The protective cover attached to the internal AC socket MUST always cover
the socket when the socket is not being used. Verify the power is off
before you attach or detach the cover.
To assemble the moisture-proof plug:
1. Connect the
the
PLASTIC NUT
above).
Innova 4200 • M1233-0053
Figure 12: Electrical Moisture-Proof Plug
MAIN BODY
to the electrical plug. Slide the
POWER CORD
,
,
WASHER
RUBBER GROMMET
WASHER
2 SCREWS
POWER CORD
and the
MAIN BODY
33
RUBBER
GROMMET
POWER
CORD
PLASTIC
NUT
through
(see Figure 12
User's Guide
Advertisement
Table of Contents
