Basic Operation - Radiodetection 1205CXB Operation Manual

1205CXB OPERATION MANUAL v1

Basic operation

1. Charge the 1205CXB using the mains charger and cable supplied, via the USB-A port
2. Press the Power button
3. Attach the cable for analysis to the BNC connector, either directly or using one of the
connection cables supplied
4. Press the
match the VOP of the cable for analysis using the arrow buttons (Buttons 11).
a. The Left and Right arrows
b. The Up and Down arrows
5. Press the
6. The 1205CXB will search for the most significant discontinuity in the cable and place
cursor 2 (Display feature 16) at the start of the reflected pulse
7. You can read the distance to the discontinuity at the bottom of the display (Display
feature 20)
8. Press the Power button
NOTE: You can set an Auto Power Off time. For details, see the Menu section
© Copyright Radiodetection Ltd 2022
for 2 seconds to power the 1205CXB on
button (Button 5) several times until VOP is highlighted. Change this to
and change the VOP by 1%
and change the VOP by 0.1%
button again until Search is highlighted, then press
at any time to turn the 1205CXB off
12
(Button 12)