Displaying Loaded Waveforms; Deleting Waveforms - Radiodetection 1205CXB Operation Manual

Displaying loaded waveforms

You can display the loaded waveform, L, on its own or at the same time as the live cable waveform, C. If
you look at the two separately, you can also decide whether to have them overlaying or offset from
each other.
When a loaded waveform is displayed, the 1205CXB also shows its save information at the top right
hand side of the display:

Save location, eg @USB

File name, eg 20220131_112557

Save date, eg 01/31/2022

Pulse width, eg 50ns

VOP, eg 85.0%

Output impedance, eg 75Ω
To select how the loaded waveform, L, is displayed, press the button several times until Func is
highlighted. Use the left and right arrow keys to scroll through:

LOAD, shows L on its own

C&L, shows both L and C

C-L, shows the difference between C and L

CABLE, shows C on its own
NOTE: When displaying C&L, press the
comparison

Deleting waveforms

You can delete a waveform from the on-board FLASH memory at any time. To delete a waveform:
1. Press the
2. Using the arrow keys, ensure that FLASH is highlighted and press
3. Scroll through the list of saved waveforms using the arrow keys, then press the right
arrow key twice so that the green cross
4. Press
button to offset the L waveform from C for easy side by side
button (Button 10)
to delete the selected waveform
15
1205CXB OPERATION MANUAL v1
(Button 12).
is displayed
© Copyright Radiodetection Ltd 2022