Hitachi SAMURAI Series Service Manual page 87

3. Servicing
Removing covers
3.4.2 Panels on the left (2 panels) or right side (2 panels).
Each panel have two locks. With the key (female square key), turn the locks 1/4 and remove the cover by pulling it.
N O T E
All locks have a mark: ▲ to identify the lock position (Open/Close):
When pulling, a resistance will be appreciated due to there are a snap connection in each corner of the cover.
3.4.3 Front cover (E-Box - compressor side)
Remove the 6 screws (3 on the right side and 3 on the left side of the panel)
The panel have 6 locks. With the key (female square key), turn the locks 1/4 and then the cover is free to be removed.
79
SMGB0082 rev.1 - 07/2015
Close Open
►, , ▼
Open
Close
▼ ►, ,
3