Hitachi SAMURAI Series Service Manual page 113

3. Servicing
Electrical components
3 Firmly pull the metallic plate where the LCD screen is at-
tached in order to have access to the rear side of the LCD
screen.
4 Access to the rear side of the LCD screen is now avail-
able. Continue reading to proceed to the removal of the
LCD screen unit.
5 Remove the wirings:
a. Remove the COM2 connector. Using a flat screwdriv-
er, loosen the 2 screws of the COM2 port connector
and pull backwards the connector.
a. Remove the DC24V connector by pulling backwards.
105
SMGB0082 rev.1 - 07/2015
Firmly pull until release
the fixation assembly
COM2 port
connector
LCD power supply
connector
3