Table of Contents
Advertisement
If offset, span, or 2-point adjustment has already been performed,
Caution
be sure to initialize the adjustment before performing the 2-point
adjustment.
Measurement item
(unit)
[Display]
Turbidity (NTU,
FNU, mg/L, no unit)
[Turb.]
Turbidity ( 度 )
[Turb.]
Press
1
The measurement item selection display is displayed.
Select [Turb. TSC-10-D] using
2
, and press
Use
The adjustment menu is displayed.
Select [2-Point Adjustment]
3
using
Measurement item setting range
(display value/adjusted value)
[Point 1]: 0.00 to (2nd point value - 2)
[Point 2]: (1st point value + 2) to 1000.0 1000.0
[Point 1]: 0.00 to (2nd point value - 2)
[Point 2]: (1st point value + 2) to 100.0
.
to switch pages.
, and press
.
Sensor channel
.
Factory de-
fault setting
0.00
0.00
100.0
Sensor model
Measurement item
27
Advertisement
Table of Contents
