Table of Contents
Advertisement
Input a span adjustment value.
4
Select a digit by
value by
When a value outside the set range is entered, a short beep sounds.
Pressing
value to the factory default setting.
By pressing
During adjustment a progress bar is
displayed.
When completed, the display returns
to the measurement value display.
2-point adjustment
Display current values of the 2 points as any adjustment values,
respectively.
Performing 2-point adjustment changes the offset and span based on the
adjusted values.
For 4-20 mA output ("7 4-20 mA Setting" P.16) and alarm output ("Alarm
output setting" P.18), the adjusted values are applied.
Display value
after 2-point
adjustment
26
, and press
simultaneously while entering a value resets the
or
, the value returns to the one before changing it.
[Point 1]
Adjusted
value
Current display
value
and
.
[Point 2]
Adjusted value
Current display
value
Measurement
value
Advertisement
Table of Contents
