Table of Contents
Advertisement
7
4-20 mA Setting
Set the 4-20 mA signal output setting from SC-U1.
The factory default setting is OFF for 4-20 mA signal output.
To set 4-20 mA output setting, press
Caution
Pressing
Output item selection
Select an item to output by 4-20 mA signal.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "5.3 4-20 mA Setting" and " ◆ Output Item Select".
When "Display item (unit selection)" P.14 is changed, the out-
put item of the channel of 4-20 mA setting that has set the display
Caution
item becomes OFF.
Set again if necessary.
Output item
[Display]
Turbidity
[Turb.]
16
automatically retains the measurement value.
.
Advertisement
Table of Contents
