Table of Contents
Advertisement
With fluctuation of water
level taken into account,
dispose the sensor so as
to be immersed up to of the
order of 30 cm below the
expected lowest water level.
The sensor can be installed in landscape
orientation, and in order to prevent the
sensor from hitting the side wall or
rotating by the water flow, a mounting
attachment (TA-3) for fixing the sensor to
the pipe is available as an option.
For details, contact the dealer or visit our
website:
https://www.optex.co.jp/e/products/
environmental-sensor/
*Pipe: The 25A stainless steel pipe (outer
diameter 34 mm) for piping to be
prepared by the user.
・ Read the precautions in the "TA-3 instruction manual" carefully.
・ Be sure to install the cable protective cover. Otherwise the cable may be
damaged and flooded during maintenance.
10
30 cm min.
(2 meter max.)
Reference
Dispose the sensor in
water without air bubbles.
Advertisement
Table of Contents
