Installation - GreenWorks 2600200 Operator's Manual

Save these instructions.
7

INSTALLATION

WARNING
Do not change or make accessories that are not
recommended by the manufacturer.
WARNING
Do not connect to power supply until you assemble all the
parts.
7.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
7.2 INSTALL THE MIDDLE HANDLE
1. Align the holes in the middle handle (15) and the lower
handle (16).
English
2. Put the bolts (14) through the middle handle (15) and the
lower handle (16).
3. Tighten the handle knob (13) onto the bolt (14).
4. Repeat for left/right side.
7.3 INSTALL THE UPPER HANDLE
1. Align the holes in the middle handle (15) and the upper
handle (33).
2. Put the bolts (14) through the holes.
3. Tighten the handle knobs (13) onto the bolts (14).
4. Do the same operation on the other side.
7.4 INSTALL THE CHUTE
DEFLECTOR
1. Align the tabs (20) on to the slots (17) on one side first.
2. Once you have engaged one tab on one slot push until
you hear a click. Repeat on other side.
3. Push the chute deflector (11).
4. Make sure that the tabs (20) engage the slots (17) on the
two sides.
5
EN