Stihl FS-KM Instruction Manual page 14

English
Permissible combinations
Choose the correct combination from
the table depending on the cutting tool!
WARNING
For safety reasons only the cutting
attachments, deflector, handle and
harness versions within one line of the
table may be combined with one
another. No other combinations are
permitted because of the risk of
accidents!
WARNING
Loop-handled machines must be
equipped with a barrier bar.
Cutting attachments
Mowing heads
1 STIHL SuperCut 20-2
2 STIHL AutoCut C 25-2
3 STIHL AutoCut 25-2
4 STIHL AutoCut C 26-2
5 STIHL AutoCut 36-2
3)
6 STIHL PolyCut 20-3
7 STIHL DuroCut 20-2
8 STIHL PolyCut 28-2
Metal cutting tools
9 Grass cutting blade 230-2
(Ø 230 mm)
10 Grass cutting blade 260-2
(Ø 260 mm)
11 Grass cutting blade 230-4
(Ø 230 mm)
12
12 Grass cutting blade 230-8
(Ø 230 mm)
1)
13 Brush knife 250-3
(Ø 250 mm)
14 Circular saw blade 200-22 chisel
1)2)
tooth (Ø 200 mm), circular saw
blade 200-22 HP chisel tooth
(Ø 200 mm)
WARNING
Grass cutting blades, brush knives and
circular saw blades of other, non-metal
materials must not be used.
Deflectors, limit stop
15 Deflector for mowing heads
16 Deflector with
17 Skirt and blade for mowing heads
18 Deflector without skirt and blade for
metal cutting attachments,
items 9 to 14
19 Limit stop for circular saw blades
Handles
20 Loop handlewith
21 Barrier bar
22 Bike handle
1)
Not approved for KM 55 R, FS 56 R
2)
Not approved for FR 131 T,
KM 55 R, KM 56 R, KM 85 R,
KM 94 R, KM 111 R, KM 131 R,
KMA 130 R, KMA 135 R
1)
Not approved for KMA 135 R
Shoulder straps
23 Shoulder strap can be used
24 Shoulder strap must be used
25 Full harness can be used
26 Full harness must be used
1)2)
FS-KM