Names And Functions Of Parts; Main Unit - Kenwood VR-8070 Instruction Manual

Names and functions of parts

Main unit

Speaker
indicators
*
Input channel indicators
Input channel indicators
L
light up according to the
incoming audio signals.
"S" indicator will light up
SL S
when the surround
component of the audio
*
Input channel indicators
signals is only 1 channel.
Output channel indicators
POWER
STANDBY
ON/STANDBY
A SPEAKERS B
PHONES
1 POWER ON/STANDBY
key
Use to turn the power ON/STANDBY.
STANDBY indicator
2 SPEAKERS keys
Use to turn the A/B speakers on or off.
3 THX key
Use to switch the status of THX.
4 SPEAKER EQ key
Use to select SPEAKER EQ's setting.
5 Surround LED (light-emitting diode)
indicators
THX indicator
Lights when the THX mode has been chosen.
THX mode may or may not be activated
depending upon the applicable playback
mode.
SPEAKER EQ indicator
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby
Digital mode.
DTS indicator
Lights when the receiver is in the DTS mode.
DSP indicator
Lights when the receiver is in the DSP mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition,
the system can be turned ON by remote control unit.
6 EN
MUTE CLIP Input mode
indicator indicator indicators
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG
C SW R
LFE
SB SR
THX DOLBY DIGITAL
SPEAKER EQ DTS
DSP
ACTIVE EQ
THX SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE
DVD/6CH CD/DVD PHONO TUNER
VIDEO 1 VIDEO 2 VIDEO 3 MD/TAPE
6 ACTIVE EQ key
)
Use to select ACTIVE EQ's setting.
7 DSP key
Use to select any of the DSP mode.
¢
8 STEREO key
Use to switch the listen mode to STEREO.
‹
9 INPUT MODE key
Use to switch between the full auto, digital
∞
and analog inputs.
0 DIMMER key
Use to select the REC MODE.
Use to adjust the brightness of the display.
›
! VOLUME CONTROL knob
@ MUTE key
Use to temporarily mute the sound.
# PHONES jack
§
Use for headphone listening.
$ Input Selector keys
∞ DVD/6CH, CD/DVD, PHONO , TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE
Use to select input sources.
% SOUND key
‹
Use to adjust the sound quality and the
ambience effects.
^ BAND key
‹
Use to select the broadcast band.
›
Listen mode
indicators
DTS DOLBY DIGITAL STEREO
MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS
Frequency display
Input display
Preset channel display
Display
Surround mode display
DIMMER
MULTI CONTROL
SOUND TONE SETUP
BAND AUTO MEMORY
∞
‹
‹
8
¶
fi
¢
∞
§
¢
fi
•
NEO:6
THX
AUTO indicator
Surround EX
MEMORY indicator
AUTO
MEMORY
STEREO indicator
STEREO
TUNED
TUNED indicator
VOLUME CONTROL
DOWN UP
MUTE
LISTEN MODE
AV AUX
S VIDEO VIDEO L-AUDIO-R
& AUTO key
Use to select the auto or manual tuning
mode.
* TONE key
Use to switch the status of TONE control.
( MEMORY key
Use to store radio stations in the preset
memory and to start the Auto Memory.
) SETUP key
Use to select the speakers' settings etc.
¡
keys
Use for selection adjustments during sound,
setup and preset channel functions.
™ MULTI CONTROL knob
Use to control a variety of settings.
£ LISTEN MODE knob
Use to select the listening mode.
¢ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks
∞ AV AUX key
Use to switch the input to AV AUX.
•
∞
•
)
)
)
‹
(
(