Kenwood VR-8070 Instruction Manual page 22

Preparing for surround sound
3 For optimum bass peak level, keep increasing the bass peak
level by using the MULTI CONTROL knob or Multi (%/fi)keys
while test tone is being output until clip sound is heard from
the Subwoofer or Front Speaker.
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL ANALOG
SW
LFE
4 Press the SETUP key to accept the setting.
7
Input the distance to the speakers.
• Indicators appear only for the channels of the speakers selected
in step 4.
1 Press the keys or @/# keys to select the SP DISTANCE
∧ ∧ ∧ ∧ ∧ /∨ ∨ ∨ ∨ ∨
on setup displays and press the SETUP key again.
2 Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L) : ____ feet (meters)
Distance to Center Speaker (C)
Distance to Front Right Speaker (R) : ____ feet (meters)
Distance to Surround Right Speaker (SR)
Distance to Surround Back Right Speaker(SBR)
Distance to Surround Back Left Speaker (SBL)
Distance to Surround Left Speaker (SL)
Distance to Subwoofer (SW)
3 Use the keys or @/# keys to select the speakers and the
∧ ∧ ∧ ∧ ∧ /∨ ∨ ∨ ∨ ∨
MULTI CONTROL knob or Multi (%/fi) keys to adjust the
distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL ANALOG
L C SW R
LFE
SL S SB SR
Indication in feet
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
8
Adjust the LFE LEVEL (Low Frequency Effects).
1 Press the keys or @/# keys to select the LFE LEVEL and
∧ ∧ ∧ ∧ ∧ /∨ ∨ ∨ ∨ ∨
press the SETUP key.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the LFE LEVEL.
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL ANALOG
L R
LFE
SL S SB SR
3 Press the SETUP key again to return to main setup displays.
22
EN
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
AUTO DETECT THX
ACTIVE EQ. MATRIX
Surround EX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
CINEMA EQ. DTS. DOLBY DIGITAL NEO:6
AUTO DETECT THX
ACTIVE EQ. MATRIX
Surround EX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Indication in meters
CINEMA EQ. DTS. DOLBY DIGITAL NEO:6
AUTO DETECT THX
ACTIVE EQ. MATRIX
Surround EX
96kHzfs DSP MODE DISCRETE PRO LOGIC PRO LOGIC CSII
9
Select the display mode.
1 Press the ∧ ∧ ∧ ∧ ∧ /∨ ∨ ∨ ∨ ∨
2 Press the SETUP key for the following displays:
1 DISP SELECTOR
RDS
RTY
2 DISP LISTEN
AUTO
MEMO
STEREO
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
TUNED
the display mode.
SP
A B
L R
LFE
SL S SB SR
4 Press the SETUP key again to accept the setting.
5 Use the key or # key to select EXIT.
∧ ∧ ∧ ∧ ∧
SP
A B
L R
LFE
SL S SB SR
6 Press the SETUP key to exit the SETUP mode.
RDS
RTY
AUTO
MEMO
STEREO
TUNED
RDS
RTY
AUTO
MEMO
STEREO
TUNED
keys or @/# keys to select the DISP MODE.
: Displays the current input selector.
: Displays the current listen mode.
CINEMA EQ. DTS. DOLBY DIGITAL
MUTE OPTICAL 6CH INPUT
AUTO DETECT
ACTIVE EQ. MATRIX
CLIP
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC
CINEMA EQ. DTS. DOLBY DIGITAL
MUTE OPTICAL 6CH INPUT
AUTO DETECT
ACTIVE EQ. MATRIX
CLIP
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC PRO LOGIC
NEO:6 RDS
THX
RTY
Surround EX
CSII
AUTO
MEMO
STEREO
TUNED
NEO:6 RDS
THX
RTY
Surround EX
CSII
AUTO
MEMO
STEREO
TUNED