Connecting The Speakers - Kenwood VR-8070 Instruction Manual

Setting up the system

Connecting the speakers

Surround Back Speakers
Left Right
•To make sure that each speaker has been connected properly, pay attention to the test tone from each speaker.
Refer to "5 Adjust the speaker volume level .".
• This model is designed on the assumption that a pair of Surround Back Speakers is connected.
When use only one Surround Back Speaker, connect it with either speaker terminal of "SURROUND BACK L" or "SURROUND BACK R" and
increase the volume level of the test tone by 3 dB for the channel which has been connected.
In this case, when "Dolby PRO LOGICIIx" is selected at LISTEN MODE, sound is output at the connected channel only.
SURROUND
GRAY
R L
+ - -
SURROUND
R L
TAN
BACK
+ - -
RED WHITE
+
-
R FRONT A L
Left
Right
Front Speakers A
¡
Surround Speakers
Right
Left
BLUE
+
BROWN
+
GREEN
+
CENTER
Right
Center
Speaker
¡
Powered
Subwoofer
CENTER
SUB
WOOFER
FRONT B
R L
- - +
Left
Front Speakers B
15
EN