Pre Out Connections - Kenwood VR-8070 Instruction Manual

Setting up the system

PRE OUT connections

This receiver has additional PRE OUT jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as
shown in the example below.
L
R
ROOM B
• Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker.
• To use the PRE OUT jacks, press only the SPEAKERS A key to the ON position.
• This model is designed on the assumption that a pair of Surround Back Speakers is connected.
When use only one Surround Back Speaker, connect it with either speaker terminal of "SURROUND BACK L" or "SURROUND BACK R" and
increase the volume level of the test tone by 3 dB for the channel which has been connected.
In this case, when "Dolby PRO LOGICIIx" is selected at LISTEN MODE, sound is output at the connected channel only.
16
EN
CENTER
FRONT SURROUND SURROUND SUB
BACK WOOFER
PRE OUT
Center Speaker
Power Amplifier
Powered
Subwoofer
Surround Back
Speakers
Power Amplifier
L
Surround Speakers
Power Amplifier
L
Front Speakers
Power Amplifier
L
¡
R
R
R