Lubrication Chart - New Leader Hi-Way SUPER P Operator's Manual

Lubrication Chart

Shut off all power and allow all moving parts to come to rest before performing any
maintenance operation� Failure to comply with this warning could result in death or serious
injury�
The spreader should be regularly lubricated with the lubricants recommended in this manual in accordance
with the following chart:
LOCATION
Hydraulic Pump Drive
Transmission PTO - Slip Joint
Transmission PTO - U-Joint
Hydraulic System
Reservoir
Filter
Drive Chains
Main Drive Chain -
Engine to Gearcase
Spinner Drive Chain -
Gearcase to Spinner
Conveyor
Dragshaft Bearings
Idler Adjuster
Idler Shaft Bearing
Chain
Input Shaft Bearing
Gearcase
Gearcase
Spinner
Shaft Bearings
NOTE: Unusual conditions, such as excessive dust, temperature extremes or excessive moisture may
require more frequent lubrication of specific parts.
* See "Lubricant and Hydraulic Oil Specifications" for types of lubricants and oil to be used.
301321-AA-I
PLACES METHOD
1 Grease
2 Grease Gun
1 Check Daily; Change Annually
1 Check Daily; Change when indicator is red
1 Spray Oil
1 Spray Oil
2 Grease Gun
2 Hand Grease
2 Grease Gun
2 Strands Spray Oil
-
1 Grease Gun
1 Fill Through Vent Plug
2 Grease Gun
- 48 -
SUPER P
FREQUENCY
Weekly
Monthly
Daily
Daily
Weekly
Weekly
Weekly
Weekly
Weekly
Check monthly;
annually�
Weekly
www.NewLeader.com
(800) 363-1771
Change