RH Baby&child MODERN METAL DISPLAY SHELF Assembly Instructions

MODERN METAL DISPLAY SHELF - ASSEMBLY INSTRUCTIONS

PARTS INCLUDED:

A. M5 Wall Anchors (2 pcs.)
B. Metal Sheets (4 pcs.)
C. M5 Wall Screws (2 pcs.)
D. Whole Metal Frame (1 pc.)
E. 2.5"L Wall Screw for Stud (1 pc.)
TOOLS NEEDED: (NOT INCLUDED)
Pencil
Electric drill

IMPORTANT SAFETY INSTRUCTIONS:

1. Professional installation is strongly recommended.
2. For your safety, it is recommended that two people hang the fixture.
3. These instructions are provided for your safety. It is important that they are read carefully and completely
before installing the fixture.
4. It is imperative that the shelf is mounted into a wall stud.
5. Maximum loading weight of this shelf is 50 lbs, but make sure the loading of each layer is placed equally.
ASSEMBLY INSTRUCTIONS:
There are two assembly options.

Assembly option 1: use 2 wall anchors and 2 wall screws

1. Carefully remove all parts from the box and remove all plastic coverings.
2. Lay all parts on a soft surface to avoid damaging the finish.
3. To affix the shelf to drywall, determine final placement on the wall and mark the 2 screw holes of the
whole metal frame (D) on the wall with the pencil. Be sure to confirm precise distance and levelness
between holes for accurate hanging.
4. Drill 2 holes into the wall, then insert the wall anchors (A). Align holes in the wall with the holes on the
back of whole metal frame (D), then screw wall screws (C) into the anchors.
5. Place a metal sheet (B) onto each layer of whole metal frame (D) and make sure they are affixed properly.
6. Installation is complete.
NO. ITEM
1
2
3
4
DESCRIPTION QTY.
M5 Wall Anchors 2 pcs.
M5 Wall Screws 2 pcs.
2.5"L M6 Wall
1 pcs.
Screw for Stud
Metal Sheet 4 pcs.