Connecting Wires To Terminals - Kenwood KDC-X717 Instruction Manual

Kenwood cd-receiver instruction manual
Hide thumbs Also See for KDC-X717:
Table of Contents

Advertisement

Connecting Wires to Terminals

2WARNING
If you connect the ignition wire (red) and the battery
wire (yellow) to the car chassis (ground), you may
cause a short circuit, that in turn may start a fire.
Always connect those wires to the power source
running through the fuse box.
2CAUTION
When only two speakers are being connected to the
system, connect the connectors either to both the
front output terminals or to both the rear output
terminals (do not mix front and rear). For example, if
you connect the + connector of the left speaker to a
front output terminal, do not connect the - connector
to a rear output terminal.
If no connections are made, do not let the wire come out from the tab.
When using the optional power amplifier, connect
to its power control terminal.
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna, or
to the power terminal for the booster amplifier of the
film-type antenna.
To car light control switch
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
Car fuse
box
(Main fuse)
Battery
Rear right output (Red)
Rear left output (White)
Non-fading right output (Red)
(KDC-X917/X817/X717 only)
Non-fading left output (White)
(KDC-X917/X817/X717 only)
Front right output (Red)
Front left output (White)
FM/AM antenna input
Power control wire (Blue/White)
P.CONT
ANT
Motor antenna control wire (Blue)
CONT
ILLUMI
Dimmer control wire (Orange / White)
EXT.
External amplifier control wire
CONT.
(Pink / Black) (KDC-X917/X817/X717 only)
Ignition key
switch
ACC
Car fuse box
+
Fuse (10A)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
— 44 —
To KENWOOD disc changer/
DAB control input/
KPA-SD100/KPA-HD100/KPA-
SS100
NOTE
To connect these leads, refer to the
relevant instruction manuals.
Wiring harness
(Accessory1)
White/Black
To front left
speaker
+
FRONT • L
White
Gray/Black
To front right
speaker
+
FRONT • R
Gray
Green/Black
To rear left
speaker
REAR • L
+
Green
Purple/Black
To rear right
speaker
REAR • R
+
Purple

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-9017Kdc-x917

Table of Contents