General Features; Power - Kenwood KDC-X717 Instruction Manual

General features

5
ANG
ANG
PTY
MENU
LOUD
DISP
NAME
DISP
CLK
5 ATT/
LOUD
KDC-X917/X817/9017
LOUD indicator
KDC-X717
LOUD indicator
(KDC-X917/X817/9017)
¢
FM Description about this indicator for these features can be displayed
SRC/
by setting the Lower Part Display (page 12) to "... + Function
OFF
indicator."
DAB

Power

OFF
You can help prevent theft of the unit by reversing the
AUTO AME AUD
NF
faceplate so that the control panel cannot be seen, hiding the
unit, and shutting off the audio.
Power ON/OFF:
Q
AM/
NF
4
NOTE
• When the moving faceplate is hit by an object, it will stop and
• The status of the security code function (page 34) is display
2CAUTION
• Make sure the console is uncovered while the faceplate is
• Do not exert any excess force on the movable parts of the unit,
— 8 —
When you turn your vehicle's ignition on, the unit's power will
also turn on, with the faceplate reversing to show the control
panel.
When you turn your vehicle's ignition off, the faceplate will
reverse to hide the control panel after a period of time which
you have set in the "Time setting for removing the faceplate" in
the menu. The unit's power will turn off.
Alternatively, you can remove the faceplate during that period.
For details, refer to the "Removing the faceplate" (page 14).
return to its original state. Remove the object and repeat the
action.
whenever the power is switched on.
"CODE ON" : Security code has been registered
"CODE OFF" : Security code has not been registered
Using the Unit in Vehicles with Covered Consoles
reversed.
including the faceplate, as it can cause failure in the unit's
mechanism.