Related Manuals for Kenwood KDC-X8016BT
Summary of Contents for Kenwood KDC-X8016BT
- Page 1 CD-RECEIVER KDC-X8016BT KDC-X8016BTL KDC-X7016 KDC-X7016L INSTRUCTION MANUAL © B64-4520-10/02 (MW/M3W)
-
Page 2: Table Of Contents
Dual Zone System Frequency Step Setting DSP Setup TV control (Optional) Car Type Selection Basic Operation Speaker Setting Preset Memory Car Type Fine Adjustments Preset Tuning X’Over Setting Direct TV Tuning Audio Preset Memory Audio Preset Recall KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 3: Before Use
• When you purchase optional accessories, check with To prevent a short circuit, never put or leave any your Kenwood dealer to make sure that they work metallic objects (such as coins or metal tools) inside with your model and in your area. -
Page 4: Component Names And Functions
To select menu list item (turn and press the knob). See device or an iPod (press the button at least 2 seconds). <Menu List Operation> (page 5) for details. KDC-X8016BT/KDC-X8016BTL : Enters Play mode Menu 11 [ ] button (KDC-X8016BT/ (press the button at least 1 second). -
Page 5: General Operation
Albums each time switches between sources. Tuner (“TUNER”) ➜ Bluetooth Audio (“BT 1 sec. AUDIO”) (KDC-X8016BT, KDC-X8016BTL only) Play Mode ➜ USB (“USB”) or iPod (“iPod”) ➜ CD (“CD”) ➜ Auxiliary input (“AUX”) ➜ Standby (“STANDBY”) In this manual, the above selection is indicated as ➜... -
Page 6: Ipod/Iphone Operation
Select “Music” > “Artists” > Artist name > Album name > Song title Cancelling Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 7: Play Mode
Repeat play. control function. Select iPod source iPod Setting Enter Play Mode Menu KDC-X8016BT KDC-X8016BTL You can select following iPod Setting items. Press the [VOL] knob for at least 1 second. Select iPod source KDC-X7016 KDC-X7016L Press the [PLAY MODE] button. -
Page 8: Ipod Setting
After this step, you need to browse. See step 4 of Select the “iPod” display. <Selecting a song by browsing iPod> (page 6) to ✍ SRC Select mode 2: Pressing the [SRC] button select a song. repeatedly switches source. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 9: Selecting A Song By Browsing Ipod
Cancelling the Direct Search Alphabet Search Press the [SEARCH MODE] button. You can select a song by alphabet. This function ⁄ searches songs whose name contain the specified • Characters that can be entered are alphabetical character(s) in the list of the selected Search item characters (A to Z), numerical characters(0 to 9), and “... -
Page 10: Selecting A Song By Browsing Ipod
• The ending of a song may be cut unless the song has a silence of 1 second or longer at the end. • Random play cannot be performed during playback of a song in the Playlist. Deleting a Song from the Playlist Press the [SEARCH MODE] button. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 11: My Playlist
Enter Delete Playlist mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Delete My Playlist”. Turn the [VOL] knob and press it when the desired item is displayed. Select ”Delete One” or ”Delete All”. Selecting “Delete All”... -
Page 12: Usb Device Operation
Press the [MENU] button for at least 1 second. ✍ For example: Searching for ¡". Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > 1 > 2 > ¡" KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 13: Play Mode
Select USB source Make a setting Enter Play mode Press the [4] or [¢] button. KDC-X8016BT KDC-X8016BTL Exit Menu List mode Press the [VOL] knob for at least 1 second. Press the [MENU] button for at least 1 second, KDC-X7016 KDC-X7016L and then press it again briefly. -
Page 14: File Search
Press the [SEARCH MODE] button. ⁄ • This operation is effective only for the files registered in the database created with KENWOOD Music Editor. • Set the ratio with “Skip Search” in <USB Setting> (page 13). KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 15: Music Disc/ Audio File Operation
Music disc/ Audio file Operation ⁄ Release MENU VOL DISP SEARCH MODE • No sound is output while playing audio file. Pause and Play Press the [38] button to pause or resume playback. ¢ /PLAY MODE Function of Internal CD source Music Search Basic Operation Selecting the music you want to listen to from the... -
Page 16: Play Mode
“ON”/ “OFF” “Disc Random” When set to “ON”, plays the music on the disc randomly. “ON”/ “OFF” “Magazine Random When set to “ON”, plays the music in the disc changer randomly. “ON”/ “OFF” KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 17: Direct Music Search
Function of remote control Direct Music Search Searching the music by entering the track number. Enter Direct Music Search mode Press the [DIRECT] button on the remote control. Enter the music number Press the number buttons on the remote control. Search the music Press the [4] or [¢] button. -
Page 18: Tuner Operation
Press the [MENU] button for at least 1 second, “Auto1”: Automatic search for a station. and then press it again briefly. “Auto2”: Search in order of the stations in the Preset memory. “Manual”: Normal manual tuning control. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 19: Auto Memory Entry
Cancelling Direct Access Tuning Auto Memory Entry Press the [DIRECT] button on the remote Putting stations with good reception in the memory control. automatically. Select the radio band you wish to store in the Frequency Step Setting preset memory Changing the tuning frequency step. Enter Menu List mode The original setting is FM band 50 kHz, and AM Press the [MENU] button. -
Page 20: Tv Control (Optional)
Turn the [VOL] knob and press [VOL] knob for at least 2 seconds when the desired item is displayed. Select preset number. Cancelling the Preset Memory mode Press the [MENU] button for at least 1 second, and then press it again briefly. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 21: Bluetooth Audio Operation
Bluetooth device main unit of the audio player to connect Bluetooth. By operating the Bluetooth device, register the audio player (pairing). Select “KENWOOD BT CD/R- 4P1”/ “KCA-BT200” from the list of connected units. Enter a PIN code Input the PIN code (“0000”) in the Bluetooth device. -
Page 22: Operation Of Hands-Free Phoning
During a Call Bluetooth device By operating the Bluetooth device, register the Disconnecting a Call hands-free unit (pairing). Select “KENWOOD BT Press the [SRC] button or press the [ ] / [PLAY CD/R-4P1”/ “KCA-BT200” from the list of connected MODE] button for at least 1 second. -
Page 23: Other Functions
Terminating the Current Call below. Press the [SRC] button. Exit the dialing method mode Continuing the Current Call KDC-X8016BT KDC-X8016BTL Press the [ ] button. Press the [VOL] knob. KDC-X7016 KDC-X7016L Turn the [VOL] knob and press it when the Press the [PLAY MODE] button for at least 1 desired item is displayed. -
Page 24: Calling A Number In The Call Log
Function of KDC-X8016BT/ KDC-X8016BTL KDC-X7016/ KDC-X7016L with KCA-BT200 (Optional Accessory) Operation of hands-free phoning Select a name or phone number Calling a Number in the Phone Book Turn the [VOL] knob and press it when the Enter Bluetooth mode desired item is displayed. -
Page 25: Calling A Number In The Call Log
Function of KDC-X7016/ KDC-X7016L Registering to the Preset Dial Number Make a Voice Dialing Call List Enter voice recognition mode Select the phone number you wish to register Press the [VOL] knob for at least 1 second. Select the phone number with reference to the following: “PB Name?”... -
Page 26: Display Settings
✍ SRC Select mode 2: Pressing the [SRC] button • When the “ ” icon is displayed (at the PUSH repeatedly switches source. right edge of the display) Turn the [VOL] knob to select a setting value, KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 27: Customization Of 5-Line Display
and then press the [VOL] knob. Make a setting • When the “ ” icon is not displayed Press the [4] or [¢] button. PUSH Press the [4] or [¢] button to select a Exit Menu List mode setting value. Press the [MENU] button for at least 1 second, Exit Menu List mode and then press it again briefly. -
Page 28: Customization Of Spectrum
Clock (“Clock”) Date (“Date”) Blank (“Blank”) Enter the Display Setting mode and select the Spectrum analyzer display mode In Bluetooth audio source (KDC-X8016BT/ Turn the [VOL] knob and press it when the KDC-X8016BTL only) desired item is displayed. 5-line display mode >... -
Page 29: Illumination Color Selection
Illumination Color Selection Auxiliary Input Display Setting Selecting the Illumination Color of the panel. Selecting the display when changing to Auxiliary input source. Enter Menu List mode Press the [MENU] button. Select the AUX source Press the [SRC] button. Turn the [VOL] knob and Enter Illumination color selection mode press it when the desired item is displayed. -
Page 30: Clock And Other Functions
Enter Date format mode “OFF”: Disable AUX source selection. Use this Turn the [VOL] knob and press it when the setting when the built-in AUX terminal is desired item is displayed. not used. Select “Date Mode Select”. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 31: Demonstration Mode Setting
Demonstration mode Setting “Forced CD-DA” Sets the CD read mode. “Settings 1”: Automatically distinguishes Turning the demonstration mode ON/OFF. between audio file disc and music CD when playing disc. Enter Menu List mode “Settings 2”: Forces playing as music CD. Press the [MENU] button. -
Page 32: Theft Deterrent Faceplate
Reattaching the Faceplate Align the shaft on the unit with the depression on the faceplate. Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... - Page 33 English...
-
Page 34: Audio Adjustments
Main source and sub source (Auxiliary input) output Front - X’Over Setting (page 38). channel and Rear channel separately. “Volume offset” Sets each source’s volume as a difference from the basic volume. “–8” — “±0” (AUX: “-8”— “+8”) KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 35: Audio Control
Preset Equalizer curve Select Band Item Range “BAND1” (62.5 Hz) “GAIN” Band level -9 –+9 dB You can select following Equalizer curve. “EFCT” Bass Effect “ON”/ “OFF” “BAND2” (250 Hz) “GAIN” Band level -9 –+9 dB Display Equalizer curve “BAND3” (1 kHz) “GAIN”... -
Page 36: Audio Control
- “Fader”, “Subwoofer Level” of <Audio Control> (page 34) and DSP function are not available. Set the value • The Bluetooth audio source can be set exclusively to the Press the [4] or [¢] button. front speaker. Set “2Zone Select” to “Rear”. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 37: Dsp Setup
DSP Setup Speaker Setting MENU The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items. Speaker Item Range “FRONT” “SIZE” Speaker Size Front “O.E.M.”, “10cm”, “13cm”, “16cm”, ¢ “17cm”, “18cm”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10”... -
Page 38: Car Type Selection
Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than “STANDBY”. ✍ SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 39: Speaker Setting
Enter Audio Control mode Exit Audio Control mode Press the [VOL] knob. Press the [MENU] button for at least 1 second, and then press it again briefly. Enter X’Over setting mode ⁄ Turn the [VOL] knob and press it when the desired item is displayed. -
Page 40: Favorite Control
Select “ALL” if you want to delete all. • Registering the operation procedure to an existing preset number overwrites the existing procedure. • Register 6 of Favorite Preset Memory. The memory cannot be erased by the Reset button. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... -
Page 41: Favorite Preset Memory Delete
Turn the [VOL] knob and press it when the desired item is displayed. Select “YES”. “Completed” is displayed. Exit Favorite Preset Memory Delete mode. English... -
Page 42: Bluetooth Setup
Function of KDC-X8016BT/ KDC-X8016BTL KDC-X7016/ KDC-X7016L with KCA-BT200 (Optional Accessory) Bluetooth Setup “PIN Code Edit” Specify the PIN code required when registering MENU VOL this unit using the Bluetooth device. Refer to <Registering PIN Code> (page 44). “Auto Answer” Answer a call automatically after lapse of the preset time interval for automatic answer. -
Page 43: Registering Bluetooth Device
• “BT F/W Update” (Displaying the Firmware Version) Exit BT Settings mode Display the version of the firmware of this unit. KDC-X8016BT KDC-X8016BTL For how to update the firmware, access our web site. Press the [ ] button. -
Page 44: Registering Pin Code
Function of KDC-X8016BT/ KDC-X8016BTL KDC-X7016/ KDC-X7016L with KCA-BT200 (Optional Accessory) Bluetooth Setup Registering PIN Code Selecting the Bluetooth device You Wish to Connect By operating the Bluetooth device, specify the PIN code necessary for registering this unit. When two or more Bluetooth devices have already... -
Page 45: Deleting A Registered Bluetooth
In this case, try You can delete a registered Bluetooth device. downloading manually. Enter Bluetooth mode To download from the cell-phone manually KDC-X8016BT KDC-X8016BTL Press the [ ] button. By operating the cell-phone, end the hands-free connection. -
Page 46: Adding A Voice Dialing Command
Function of KDC-X8016BT/ KDC-X8016BTL KDC-X7016/ KDC-X7016L with KCA-BT200 (Optional Accessory) Bluetooth Setup Select the name to register with reference to 4 in Function of KDC-X7016/KDC-X7016L <Calling a Number in the Phone Book> (page 24). Setting a Voice Command for If a voice tag has already been registered for a Category name, “*”... -
Page 47: Sms (Short Message Service)
Function of KDC-X8016BT/ KDC-X8016BTL KDC-X7016/ KDC-X7016L with KCA-BT200 (Optional Accessory) SMS (Short Message Service) Displaying the SMS Downloading the SMS Enter Bluetooth mode Download the short message (SMS) arrived at the KDC-X8016BT KDC-X8016BTL cell-phone so that it can be read on this unit. -
Page 48: Basic Operations Of Remote Control
When the button is pressed again, the volume returns to the previous level. • Return to previous item: [ • Exit from mode: [EXIT] • Selection of item: [5]/[∞] • Determination: [ENT] • Enter Audio Control mode: [AUD] KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... - Page 49 Hands-free phone control Preparing the remote control unit Making a call Pull the battery sheet out from the remote control • Enter Bluetooth mode: [ ] unit to the direction of the arrow. • Select a dialing method: [5]/[∞] ➜ [ENT] •...
-
Page 50: Appendix
⁄ • You cannot operate iPod if “KENWOOD” or “✓” displayed on iPod. • In this manual, the word “USB device” is used for flash memories and digital audio players which have USB terminals. -
Page 51: About "Kenwood Music Editor
KENWOOD Music Editor. • AVRCP is a profile designed to control playback and selection of music by an audio player. • “KENWOOD Music Editor Lite ver1.0” is available from the following web site: www.kenwood.com/cs/ce/ • For further information on “KENWOOD Music Editor Lite ver1.0”, refer to the site above or the application... -
Page 52: Menu List
“DISP & ILLUMI” – “Settings” – “Initial Settings” – “Skip Search” “SRC Select” “Clock & Date” – “Beep” “DISP & ILLUMI” – “TAG Language” “Chinese” “Built in AUX” “Forced CD-DA” “Favorite Delete” “Built in AMP” “Panel Beep” “DSI” KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... - Page 53 Function items appearing when the Music CD/ Function items appearing when the Hands-Free Audio file source is selected source is selected Display Page Display Page “Music” “BT Settings” – “Play Mode” “Phone Selection” “File Scan” “Audio Selection” “Track Scan” “SMS Download” “Folder Random”...
-
Page 54: Display Indicator Items
• The Bluetooth word mark and logos are owned by obtained. the Bluetooth SIG, Inc. and any use of such marks Indicates that signal strength of cell-phone. by Kenwood Corporation is under license. Other Maximum Minimum trademarks and trade names are those of their Indicates the out of coverage zone. -
Page 55: Troubleshooting Guide
Troubleshooting Guide Some functions of this unit may be disabled by What might seem to be a malfunction in your unit some settings made on this unit. may just be the result of slight misoperation or miswiring. Before calling service, first check the •... - Page 56 USB. Connect an USB device, and ✔ Another Bluetooth device or profile is used for change the source to USB again. communication. ☞ The downloading of the Phone book or the SMS disconnects the sound. KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L...
- Page 57 N/A Device: • An unsupported USB device is connected. Err No Matching: • Connection to the iPod has failed. The voice tag is wrong. Voice cannot be ➪ Check that the connected iPod is an iPod recognized because of an unregistered voice that is supported.
-
Page 58: Specifications
: AAC-LC “.m4a” files : PBAP (Phone Book Access Profile) : OPP (Object Push Profile) : SYNC (Synchronization Profile) : A2DP (Advanced Audio Distribution Profile) : AVRCP (Audio/Video Remote Control Profile) : SYNC (Synchronization Profile ) KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L... - Page 59 Input Maximum Voltage : 1200 mV Input Impedance : 10 kΩ General Operating voltage KDC-X8016BT/KDC-X8016BTL (10.5 – 16V allowable) : 14.4 V KDC-X7016/KDC-X7016L (11 – 16V allowable) : 14.4 V Maximum Current consumption : 10 A Installation Size (W x H x D)
- Page 60 This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful infl uence on the environment.