Table of Contents
Advertisement
INSTALLATION & OPERATION MANUAL
INTERCOOLER
HEAT EXCHANGER
1) ANODE for corrosion protection. Must be replaced every 250 hours.
2) When used in salt or brackish water, regular inspection is required. It is strongly
recommended to replace the sacrificial anode at the start of each season.
•
•
•
•
G7 Series
CHAPTER 9
ANTI CORROSION SYSTEM
ANODE
DON'T OPERATE ENGINE WITHOUT ANODES. IT IS HARMFUL TO
YOUR ENGINE.
CLOSE THE SEAWATER VALVE BEFORE REMOVING ANODES.
MAKE SURE TO CHECK THE ANODE PLUG IN ACCORDANCE WITH
THIS MANUAL.
DON'T LOOSEN COOLANT DRAIN PLUG.
- 55 -
CAUTION
Advertisement
Table of Contents
