Engine Oil Extaction Pump - Hyundai Seasall G7 Series Installation & Operation Manual

ENGINE OIL EXTACTION PUMP

• Allow the engine to warm up at least 5 minutes then turn off engine.
• Remove the engine oil filler cap and oil filter.
• The oil drain hose is connected to the oil extraction pump ①. Route the loose end of the hose
into the container being used for the oil change.
• Turn the ignition key on (but do not start the engine) then press and hold the button ③ until the
engine oil completely pumped out.
• When you stop pushing the button
INSTALLATION & OPERATION MANUAL
G7 Series
, the pump will turn off.
- 34 -