Warning Lamp - Hyundai Seasall G7 Series Installation & Operation Manual

Table of Contents

Advertisement

Lamp symbol information
Engine check Lamp
OFF
ON
Fuel moisture warning Lamp
OFF
ON
CHECK ENGINE
• This lamp informs you that the engine has a
serious problem.
• You can see the DTC on the LCD of the EOI .
• The ECU may limit the engine performance to
protect the engine in some cases. You should
check the engine at the nearest Hyundai
SeasAll dealer immediately.
CHARGING ( Red symbol )
• This lamp informs you that charging circuit
has a problem (such as with the alternator).
• If this lamp is turned on, you should stop the
engine and eliminate electric load, as well as
check the alternator, drive belt system and
wiring system.
OIL PRESSURE ( Red symbol )
• This lamp informs you if the engine oil
pressure is low.
If this lamp is on, you should stop the engine
and check the oil level with the oil gauge
(dip stick). If the oil is low, refill it. If you refill
the oil and the lamp still does not turn off, you
should ask your Hyundai SeasAll dealer for
maintenance.
INSTALLATION & OPERATION MANUAL
G7 Series
Battery charger Lamp
OFF
ON
Glow Lamp
OFF
ON
• This lamp informs you that the engine coolant is
• If the lamp is on, you should stop the engine
• It can be harmful to drive your engine with this
Oil pressure warning Lamp
OFF
ON
Neutral s/w Lamp
OFF
ON
COOLANT TEM. ( Red symbol )
abnormally high (110℃ +).
immediately and check with the nearest Hyundai
SeasAll dealer immediately.
lamp on
.
WATER SENSOR ( Red symbol )
• This lamp informs you to extract water from fuel
filter.
• If the lamp is on, you should stop the engine
immediately and drain the water in the fuel filter.
• It is recommended to check and drain the water
in the fuel filter at regular periods before the
lamp turns on.
• It can be harmful to drive your engine with this
lamp on.
GLOW LAMP
• Preheating time lamp
NEUTRAL SWITCH STATE
• Neutral switch state lamp
if neutral s/w turn on, you check NEUTRAL
position .
CAN STATE
• EOI to ECU CAN communication state
• If this lamp is on, you check EOI to ECU
communication line.
Water tem. Warning Lamp
OFF
ON
CAN communication Lamp
OFF
ON

Advertisement

Table of Contents
loading

Table of Contents