Table of Contents
Advertisement
ENGINE OIL LEVEL CHECKS
The engine oil level must be checked at
regular intervals.
• Be sure the boat is level.
• Start the engine and allow it to reach normal
operating temperature.
• Turn the engine off and wait about 5 minutes,
until the oil has returned to the oil pan.
• Pull the dipstick out, wipe it clean, and re-
insert it fully.
• Pull the dipstick out again and check the level.
The level should be between F and L. If it is
near or at L, add enough oil to bring the level
to F. Do not fill with engine oil above the F
mark.
RECOMMENDED OIL QUALITY
For best performance and maximum protection during all types of operation, select only those
lubricants which :
• Satisfy the requirement of the API or ACEA classification.
• Have proper SAE grade number for expected ambient temperature range.
Description
ACEA
API
Oil quality
SAE
INSTALLATION & OPERATION MANUAL
H380 Series
Specifications
Above B4
Above CH - 4
15W-40
10W-30
5W-30
0W-30
F
Service oil quality should conform to ACEA or API
classification.
-15
°
C above
-20
°
C ~ 40
°
C
-
25
°
C ~ 40
°
C
10
°
C below
- 30 -
L
Limit
Advertisement
Table of Contents
