Table of Contents
Advertisement
Quick Links
S
HOWER
PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION
IMPORTANT!
DreamLine
reserves the right to alter, modify or redesign products at any time without prior notice for the
®
purpose of product improvement and customer experience. Please refer to the model's web page on
DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional
product details.
Do Not Return Product to the Store. Contact DreamLine® with any questions
ALLIANCE PRO-HV Shower Door Installation Manual Ver 1 06/2021
ALLIANCE PRO - HV
D
I
OOR
NSTALLATION
1-866-731-2244
I
NSTRUCTIONS
Alliance Pro - HV MODEL #s:
SDAH48W700
SDAH60W650
SDAH60W700
SDAH60W760
Finishes:
01 - Chrome
04 - Brushed Nickel
06 - Oil Rubbed Bronze
09 - Satin Black
©2021 DreamLine
All Rights Reserved
®
Advertisement
Table of Contents
Related Manuals for Dreamline ALLIANCE PRO SDAH48W700
Summary of Contents for Dreamline ALLIANCE PRO SDAH48W700
- Page 1 ® purpose of product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details. Do Not Return Product to the Store. Contact DreamLine® with any questions...
- Page 2 SDAH60W760VXX09 01 - Chrome 04 - Brushed Nickel 06 - Oil Rubbed Bronze 09 - Satin Black Record the following purchase information for your records or in the event you need to contact DreamLine ® Purchase Order Store/Vendor Number Purchased From...
-
Page 3: Table Of Contents
Table of Contents Section Title Page (s) ClearMax™ Coating Information — Warnings and General Preparation Model Specific Preparation Tools Detailed Diagram of Shower Door Components Parts List Installation Steps 8-21 Wall Profile Installation 9-10 Bottom Profile Installation Top Guide Rail Installation Roller Wheel Installation Door Glass Installation 14-16... -
Page 4: Warnings And General Preparation
• • DreamLine® reserves the right to alter, modify or redesign products any time without After opening all boxes and packages, read this introduction carefully. Check that all the prior notice for product improvement and customer experience. Please refer to the items are included in the package by marking off the components on the “Detailed... -
Page 5: Model Specific Preparation
Model Specific Preparation REQUIRED: 1/4” (6.3mm) Out-of-Plumb Adjustment; Verify threshold and walls ±0.0 ±0.0 with a level Threshold must be level ±0 Threshold must be level Leave the corner protectors on the glass until it is necessary to remove them! This door is reversible. -
Page 6: Tools
Diagram on page 5; and packing list in this manual as a reference. Before discarding the carton, check for small hardware bags that may have fallen to the bottom of the box. If any NOTE parts are damaged or missing, please contact DreamLine for replacement. The shipping ®... -
Page 7: Detailed Diagram Of Shower Door Components
Detailed Diagram of Shower Door Components ©2021 DreamLine® All Rights Reserved... -
Page 8: Parts List
Parts List ALLIANCE PRO-HV Shower Door Installation Manual Ver 1 06/2021... - Page 9 Parts List ALLIANCE PRO-HV Shower Door Installation Manual Ver 1 06/2021...
-
Page 10: Installation Steps
Center the bottoms of both Wall Profiles on the the threshold as center line. Fig 1b performed in Step 1a. Use a tape measure and level to ensure both profiles threshold are evenly placed on Tools Needed Fig 1c the same plane. ©2021 DreamLine® All Rights Reserved... -
Page 11: Wall Profile Installation
Fig 2 Parts Needed Tools Needed Be sure all pilot holes are the correct size. Always use low torque and steady pressure when securing stainless steel screws to avoid stripping or breaking off the screw heads. ©2021 DreamLine® All Rights Reserved... - Page 12 Apply silicone to the screw threads before fully securing them. Use a Phillips screwdriver to install screws to avoid stripping the screws. Parts Needed Fig 3 Tools Needed ©2021 DreamLine® All Rights Reserved...
-
Page 13: Bottom Profile Installation
Profile (#01) where it meets the threshold. Measure from inside Wall Profiles Fig 4 Underside of Parts Needed Bottom Profile Tools Needed Use a metal file to remove any burrs from the Bottom Profile (#06) after cutting. ©2021 DreamLine® All Rights Reserved... -
Page 14: Top Guide Rail Installation
(D) - 1/16”(1.5mm) 1/8” drill bit 1.5” Parts Needed Fig 5 Secure both sides with NOTE ST4.0x10mm Screws (#05). Tools Needed Use a metal file to remove any burrs from the Top Guide Rail (#07) after cutting. ©2021 DreamLine® All Rights Reserved... -
Page 15: Roller Wheel Installation
Inside and Outside Door Glass. Fig 6b Inside Door Inside Door Outside Door (single hole) (single hole) (two holes) Outside Door (two holes) Fig 6b Tools Needed Right-side shower head installation shown as example Left-side shower head installation shown as example ©2021 DreamLine® All Rights Reserved... -
Page 16: Door Glass Installation
NOTE Cushion the underside of the glass and between the two glass doors. Be sure that both glass doors and Roller Wheels (#11) are oriented in the correct position for installation. Fig 7 Fig 7 ©2021 DreamLine® All Rights Reserved... - Page 17 Do not set the glass down on any hard surfaces. Use a glass suction Tools Needed cup when moving glass and leave the corner protectors on the glass until necessary to remove them. Corner Protector ©2021 DreamLine® All Rights Reserved...
- Page 18 Top Guide Rail (#08) at an inward angle and place the Roller Wheels Tools Needed NOTE (#11) into the inside track in the Top Guide Rail (#08). Allow both doors to hang freely and slide them both to one side of the shower. Fig 9 ©2021 DreamLine® All Rights Reserved...
-
Page 19: Roller Wheel Adjustment Procedure
Roller Wheel down (lower in the slot) will raise the door glass. Fig 10 Lower Roller Wheel Raise Roller Wheel to raise Door Glass to lower Door Glass door glass Fig 10 Tools Needed ©2021 DreamLine® All Rights Reserved... -
Page 20: Center Guide Installation
Center Guide to the center of the Bottom Profile, halfway beneath the door glass. Tools Needed As an option, drill a Ø 1/8” hole through the Center Guide and into the Bottom Profile. Install a ST4.0x10mm Pan Head Screw (#05). Fig 11 ©2021 DreamLine® All Rights Reserved... -
Page 21: Towel Bar And Knob Handle Installation
The gaskets install on both sides of the glass. The provided Allen wrench can be inserted into the hole in the bolt head to help tighten the knob. Fig 12b Tools Needed Fig 12b ©2021 DreamLine® All Rights Reserved... -
Page 22: Anti-Jump Inserts Installation
Anti-Jump Insert (#16) into position; sliding it to the end of the Top Guide Rail (#07). Lastly, NOTE move both panels of Door Glass (#08/09) to the opposite side to allow clearance for the installation of the second Anti-Jump Insert (#16). ©2021 DreamLine® All Rights Reserved... - Page 23 NOTE The surfaces need to be clean and free of debris before applying silicone. Hours Fig 14 Allow 24 hours for the silicone to cure before using shower. Tools Needed ©2021 DreamLine® All Rights Reserved...
-
Page 24: Product Maintenance
To maximize the life of your door, it is important to regularly inspect the glass and other hardware for misalignment, proper attachment, NOTE and/or damage. Contact DreamLine with any questions or concerns. ® ALLIANCE PRO - HV Maintenance Checklist ◻... -
Page 25: Troubleshooting
•Check all shipping/packaging material for missing parts/components. Missing Parts ―— •If not found, contact DreamLine Customer Support [1-866-731- 2244] to order factory part replacement. •Check that the Inside Door Glass closes against the shower head side of the shower. •Confirm the vinyl insert is installed properly in the Bottom Rail. - Page 26 NOTES ALLIANCE PRO-HV Shower Door Installation Manual Ver 1 06/2021...
- Page 27 NOTES ALLIANCE PRO-HV Shower Door Installation Manual Ver 1 06/2021...
- Page 28 TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine Shower Doors and Enclosures please visit DreamLine.com ® ©2021 DreamLine All Rights Reserved ®...
Need help?
Do you have a question about the ALLIANCE PRO SDAH48W700 and is the answer not in the manual?
Questions and answers