Advertisement
Figure 2 Attaching the AP-MNT-CM1 to a ceiling rail
4. Position the access point at a 30 degree angle to align the two pins on the back of the device with
the corresponding slots on the AP-MNT-CM1 mount. Press the access point into the mount, then
rotate the device clockwise until both pins lock into the mount. See
Figure 3 Securing the AP to the AP-MNT-CM1
5. Route any cables the back of the access point, and return the ceiling tiles to their original position.
Improper installation of the AP-MNT-CM1 mounting kit may result in damage to equipment and/or bodily
injury.
© 2016. All rights reserved.
2
Figure
3.
| Installation Guide
AP-MNT-CM1 Mounting Kit
Advertisement
