Webdyn Titan MTX-StarEnergy-M Software User Manual page 41

Step 7. Testing the configuration
Once rebooted, after about 30-40 seconds, it is possible to check that the device has obtained an IP from
the configuration menu from the "Wan > Status" menu.
Additionally, the MTX-StarEnergy-M has a series of LEDs on the front that, in case of problems, will help
you to solve it. See Annex 1 of this manual where each LED is detailed.
contact@webdyn.com | webdyn.com
41 V1.0 subject to changes | Webdyn © by Flexitron Group