Table of Contents
Advertisement
2.3 Firewall
Section to configure security aspects of the MTX-StarEnergy-M related to IP connectivity.
2.3.1 Firewall: Authorized IPs
This screen allows you to define, if you wish, up to 3 IP addresses authorized to make connections to/
from the WAN port (2G/3G/4G interface) for the different MTX-StarEnergy-M services. For example, if you
specify an authorized IP address 90.166.108.200 (for example, your office), certain services will only be
accessible from that IP address.
• Authorized IP1: authorized IP address number 1
• Authorized IP2: authorized IP address number 2
• Authorized IP3: authorized IP address number 3
• Router configuration: specifies whether to accept remote connections to the web configuration
environment from any IP or only from authorized IP addresses
• Serial Gateways: specifies remote connections to 2G/3G/4G-RS232/485 gateway services
can be made from any IP or only from authorized IP addresses
• Remote console: specifies whether to accept remote connections to the remote console
service from any IP or only from authorized IP addresses
• PING: specifies whether to only respond to PING requests made from authorized IPs
14
contact@webdyn.com |
V1.0 subject to changes | Webdyn © by Flexitron Group
webdyn.com
Advertisement
Table of Contents
