Table of Contents
Advertisement
2.5 Other
2.5.1 Other: AT Command
From this section it is possible to send an AT command directly to the internal modem of the MTX-
StarEnergy-M. For example, it can be interesting to check coverage, identify the surrounding telephone
cells, etc.
On the other hand, it is also possible to configure up to 5 special AT commands with which to configure
the MTX-StarEnergy-M at startup time (that is, they are self-executing each time the device is started).
• AT Command: AT command for real time execution (for example AT + COPS?). Once you press
the "SEND AT COMMAND" button, the AT command will be executed and you will see the
response
• AT1, ... AT5: initialization AT commands
17
contact@webdyn.com |
V1.0 subject to changes | Webdyn © by Flexitron Group
webdyn.com
Advertisement
Table of Contents
