Table of Contents
Advertisement
ADDITIONAL NOTES
• Once the configuration is finished, press the "SAVE CONFIG" button to save the changes.
Remember that you must restart the device for the new changes to take effect
2.5.2 Other: SMS Control
This section allows you to configure the control of the MTX-StarEnergy-M by SMS. For example, you can
configure so that the MTX-StarEnergy-M connects to 2G/3G/4G after receiving an SMS command, or
make configuration changes/readings of status by SMS command, being able to specify the authorized
telephone numbers for this.
• SMS enabled: check the box if you want to be able to activate the MTX-StarEnergy-M's
2G/3G/4G connection temporarily, after sending an SMS message. The SMS message that
has to be sent to activate the connection is "ROUTER ON", in capital letters. This option has
no relevance (it does not need to be activated) if the MTX-StarEnergy-M is configured for a
18
contact@webdyn.com |
V1.0 subject to changes | Webdyn © by Flexitron Group
webdyn.com
Advertisement
Table of Contents
