Table of Contents
Advertisement
2.5.3 Other: Periodic Autoreset
From this section you can configure a scheduled autoreset.
• Autoreset not enabled: activate the option if you do not want the device to reset automatically
• Autoreset every X hours: activate the option if you want the device to autoreset every certain
number of hours. Usually set to 24h in metering applications
• Auto-reset at specific time: select this option if you want the device to self-reset at a specific
time of day
• Auto-reset if router can't obtain IP after X minutes: allows specifying the minutes after which
the device must autoset in case of not being able to obtain an IP address
ADDITIONAL NOTES
• Once the configuration is finished, press the "SAVE CONFIG" button to save the changes.
Remember that you must restart the device for the new changes to take effect
20
contact@webdyn.com |
V1.0 subject to changes | Webdyn © by Flexitron Group
webdyn.com
Advertisement
Table of Contents
