Table of Contents
Advertisement
ANNEX 1: Connection Quick Guide
1. Connectors/indicators
Power chord
grommet
(85 to 264VAC)
LED
Power (orange)
LTE signal/IP (blue)
Remote connection
(orange)
RS232/485 activity
(orange)
32
DB9
RS232/485
Status
Power LED: lights up when the equipment is properly powered.
Network LED: it lights up when the equipment gets the IP address from the
operator. Solid blue when coverage is good, flashing blue when coverage is
poor.
Connection LED: it lights up when the Reading Platform makes an IP
connection against the modem to remotely read the meter.
Serial Port LED: it lights up when data is received on the serial port, that is,
data from the meter. It allows to check the proper functioning of the serial
link with the meter.
LTE SMA F
RS232/485
antenna
LTE/IP
Power
USB 2.0
Remote
connection
V1.0 subject to changes | Webdyn © by Flexitron Group
activity
contact@webdyn.com |
webdyn.com
Advertisement
Table of Contents
