Solutions When The Image Contains Static During Network Projection; Solutions When Network Alert E-Mails Are Not Received - Epson PowerLite S39 User Manual

Solutions When the Image Contains Static During Network Projection

Solutions When Network Alert E-Mails are Not Received

Downloaded from ManualsNet.com search engine
Note: You cannot change the user ID.
• You may need to log in to access some options on the Web Control screen. If you see a log in window,
enter EPSONWEB as the user ID and enter the password set in the projector's Network menu as the
password. The default password is admin.
• To display the Web Remote screen, enter EPSONREMOTE as the user ID and enter the password
set in the projector's Network menu as the password. The default password is guest.
• Make sure you have access to the network the projector is on.
Note: The user ID and password are case sensitive.
Parent topic: Solving Network Problems
If the projected image contains static during network projection, try the following solutions:
• Check for any obstacles between the access point, the computer, the mobile device, and the projector.
If necessary, change their positions to improve communication. Also, make sure that they are not too
far apart. Move them closer together and try to connect again.
• If the wireless connection is slow or your projected image contains noise, check for interference from
other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away
or expand your wireless bandwidth.
• If the connection speed declines, reduce the number of connected devices.
Parent topic: Solving Network Problems
If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's network menu or in
the network software.
• Set the Standby Mode setting to Communication On so the network software can monitor the
projector in standby mode. Change the Port setting according to your network environment.
Parent topic: Solving Network Problems
192