Epson PowerLite S39 User Manual page 178

Downloaded from ManualsNet.com search engine
Power light Status light
Flashing blue Light status
varies
Off Flashing blue
Lamp light Temp light
Light status Flashing
varies orange
Off Orange
178
Status and solution
Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Projector has overheated and
turned off; leave it turned off to cool
down for about five minutes, then
do the following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug
the projector and contact Epson
for help