Using The Projector On A Network; Wired Network Projection; Connecting To A Wired Network - Epson PowerLite S39 User Manual

Using the Projector on a Network

Wired Network Projection

Connecting to a Wired Network

Downloaded from ManualsNet.com search engine
Follow the instructions in these sections to set up your projector for use on a network.
Wired Network Projection
Wireless Network Projection
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
You can project through a wired network (not supported on the PowerLite S39). To do this, you connect
the projector to your network with an Ethernet cable, and then set up your projector and computer for
network projection.
After connecting and setting up the projector as described here, install the network software from the
included CD or download the software and manuals as necessary.
Note: If your projector is connected via a LAN (Ethernet) cable to a network that includes a wireless
access point, you can connect to the projector wirelessly through the access point using the Epson
network software.
Connecting to a Wired Network
Selecting Wired Network Settings
Parent topic: Using the Projector on a Network
Related references
Additional Projector Software and Manuals
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5 shielded cable or better.
1. Connect one end of the network cable to your network hub, switch, or router.
57