Table of Contents
Advertisement
2.
Release the ZIF connector (2) to which the touchpad cable is connected, and then disconnect the power
cable from the touchpad.
3.
Detach the touchpad cable (3) from the computer. (The touchpad cable is attached to the computer with
double-sided adhesive.)
4.
Remove the touchpad cable.
Reverse this procedure to install the touchpad cable.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-10
Touchpad description and part number
Description
Touchpad
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the touchpad cable (see
Remove the touchpad:
1.
Remove the seven Phillips M2.0 × 2.9 screws (1) that secure the touchpad and touchpad bracket to the
computer.
Preparation for disassembly on page
Battery on page
33).
Battery on page
33).
Touchpad cable on page
31).
56).
Spare part number
xxxxxx-001
Touchpad
57
Advertisement
Table of Contents
