HP TBD Maintenance And Service Manual page 59

c. The display panel is secured to the display back cover with tape that is installed under the left (1) and
right sides of the panel. To remove the panel, use tweezers to grasp the end of the tape (2). While
turning the tweezers, wrap the tape around the tweezers as you continue to pull the tape out (3) from
behind the display panel. You must pull the tape multiple times before it is completely removed.
d. Release the display panel cable from the retention clips (1) and routing channel that are built into the
bottom edge of the display back cover.
IMPORTANT: Before resting the display panel upside down, be sure that the work surface is clear of any
tools or debris that could scratch the display panel surface.
e. Lift the top edge of the display panel (2) and swing it up and forward until it rests upside down in front
of the display back cover.
f. Release the adhesive support strip (3) that secures the display panel cable to the back of the display
panel.
g. Release the retention bar (4) that secures the display panel cable to the back of the display panel.
52 Chapter 5 Removal and replacement procedures for authorized service provider parts