Table of Contents
Advertisement
8.
Disconnect the WLAN antenna cables (5) from the terminals on the WLAN module.
NOTE:
Models have either one or two WLAN antennas. On models with two antennas, the #1 white WLAN
antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna cable connects
to the WLAN module #2 Aux terminal.
9.
Release the wireless antenna cables from the retention clips (6) and routing channel that are built into the
computer.
10.
Remove the four Phillips M2.5 × 5.1 screws (1) that secure the display assembly to the computer.
11.
Remove the left and right hinge brackets (2).
The hinge brackets are included in the Bracket Kit, spare part number N01962-001.
12.
Swing the display hinges (1) up and back as far as they will go.
Display assembly
49
Advertisement
Table of Contents
